Get a Quote: 952-938-5451
When uptime matters and your crew can’t afford to sit around waiting on service, this 2026 Ford F-600 Stellar Lube Truck steps in and gets the job done right. Built on a Class 6 chassis and paired with a fully equipped Stellar lube system, this unit is designed to handle demanding job sites—from construction and mining to fleet maintenance operations.
Under the hood, you’ve got a 6.7L Power Stroke diesel pushing 350 HP, matched with a 10-speed automatic transmission, giving you the power and reliability you expect out of a Ford F-Series. This is a brand-new demo unit, ready to roll and ready to work.
Up top, the Stellar lube body is where this truck earns its keep. You’re looking at a multi-tank setup with four 60-gallon oil tanks, a 120-gallon used oil tank, and a 55-gallon anti-freeze tank, giving your crew the capacity to stay in the field longer without constant refills. The system is built with heavy-duty pumping equipment and high-volume dispense systems, so you’re not wasting time on slow transfers.
Everything is laid out for efficiency. Enclosed reel cabinets, Hannay hose reels, and Graco pumps keep your fluids moving clean and controlled, while the hydraulic-driven air compressor (40 CFM / 150 PSI) powers your tools right on-site. Add in insulated and heated enclosures, and you’ve got a unit that keeps working even when the weather doesn’t cooperate.
Storage isn’t an afterthought either. This truck is loaded with custom aluminum cabinets—both above and below deck—built to keep your tools, filters, and supplies organized and secure. Whether you’re servicing equipment in the yard or out in the field, everything you need is right where it should be.
From the anti-freeze and grease systems to the used oil recovery setup, this truck is built for full-service capability. It’s the kind of unit that helps crews move faster, stay cleaner, and keep equipment running without unnecessary downtime.
Bottom line—this isn’t just a lube truck. It’s a mobile service solution built for serious work.
Detailed Specifications
Chassis & Vehicle Information
- Year: 2026
- Make: Ford
- Model: F-600
- Cab Type: Regular Cab
- Condition: New
- Unit Type: Demo Unit
- Stock / Unit Number: #263479
- VIN: 1FDFF6LTXTDA03479
- Chassis Class: Class 6
- GVWR: 19,501–26,000 lb
- 4x4: Yes
Powertrain
- Engine Make: Ford Power Stroke
- Engine: 6.7L Diesel
- Horsepower: 350 HP
- Transmission: 10R140 Automatic
- Brakes: Disc
- Fuel Type: Diesel
- Air Conditioning: Yes
- Cruise Control: Yes
- Block Heater: Yes
- Trailer Brake Controller: No
- Back-Up Camera: No listed in truck spec panel
Truck Requirement & Weight Information
- Front Axle Curb Weight: 4,960 lb
- Rear Axle Curb Weight: 3,100 lb
- Front Axle Capacity: 7,500 lb
- Rear Axle Capacity: 15,500 lb
- GVWR: 23,000 lb
- C.A. / C.T.: 84 in
- Front Axle Loaded Weight: 5,766 lb
- Rear Axle Loaded Weight: 11,234 lb
- Gross Loaded Weight: 17,000 lb
Lube Body & Platform Construction
- Body Style: Stellar lube truck body with aluminum van and heavy-duty steel platform
- Platform Length: 138 in
- Overall Body Width: 96 in
- Interior / Cabinet Width Reference: 48 in
- L.B.C. Access Steps: 151 in
- Body Floor: 0.1644 in steel floor with oil-resistant non-slip flooring
- Crossmembers: Full-width formed steel crossmembers on 12–16 in centers
- Long Sills: Full-length 8 in x 3 in rectangular steel tubing
- Gussets: Located at each crossmember and long sill contact point
- Side Rails: Full-length 4 in x 2 in rectangular steel tubing
- Side Walls: Full height / length aluminum side walls with driver-side lockable access door
- Mounting: Elliott heavy-duty spring-loaded “H” bracket design
- Fixed Tie Downs: Twin bolt fixed position tie downs
- Separators: Rubber composite sill between chassis frame rail and body long sills
Tank Configuration
- Used Oil Tank: (1) 120 U.S. gallon tank
- New Oil Tanks: (4) 60 U.S. gallon tanks
- Anti-Freeze Tank: (1) 55 U.S. gallon tank
- Grease: Drum nest and hold-down kit for (1) 120 lb commercial drum
- Air Tank: Auxiliary air tank included
Product Tank Construction
- Tank Construction: Rectangular construction with large radius formed corners
- Tank Corners: Double-wall construction
- Material: Aluminum
- Anti-Freeze Tank Construction: Poly construction with steel frame
- Mounting: Structural angles
- Baffle: Interior cross baffle
- Fill Port: 4.00 in nominal diameter, non-vented, lockable fill lid
- Vent: Micron atmospheric vent on oil, anti-freeze, diesel fuel, and water tanks
- Sight Gauges: (3) liquid level sight eyes per tank; none in fuel, gasoline, or grease tanks
Storage Cabinets
- Cabinet Material: Aluminum welded construction
- Hardware: Stainless steel bolt-on hinges, multi-point latch, keyed alike, automotive weather seal
- Curb Side Upper Cabinet: 36 in L x 18 in D x 54 in H with adjustable shelving
- Curb Side Lower Cabinet: (1) 24 in L x 25 in D x 18 in H treadbrite cabinet
- Curb Side Used Filter Cabinet: (1) 24 in L x 25 in D x 18 in H below-deck cabinet with raised screen / drain
- Street Side Upper Cabinet: 36 in L x 18 in D x 54 in H with adjustable shelving
- Street Side Lower Cabinets: (2) 24 in L x 56 in D x 18 in H below-deck cabinets
- Finish: Above deck smooth painted aluminum; underbody treadbrite
Reel Cabinet & Hose Reel Enclosure
- Construction: Formed steel construction with integral drip ledge
- Reel Mounting: Heavy-duty, multi-level, with sloped bottom drip tray and drain plug
- Rear Access: Smooth painted aluminum flip-up door with gas charged springs
- Interior Lighting: (12) VDC LED strip lights installed in hose reel area
Hydraulic System
- System Type: Open loop, open center hydraulic system
- Pump: Single section gear pump
- PTO: Transmission-mounted power take-off (air or electric shift)
- Filtration: 10 micron return line filter with indicator gauge
- Cooler: Heat exchanger with 12 VDC electric fan
Air Supply System
- Air Compressor: Hydraulic-driven 40P piston compressor
- Air Output: Max 40 CFM at 150 PSI
- Air Hose Reel: Hannay spring rewind hose reel with 50 ft of 1/2 in air hose
- Air Receiver: ASME certified air receiver with air filter, lubricator, and regulator(s)
Oil Systems
- Quantity: (4) oil systems
- Oil Pump: Air-operated Graco 5:1 oil pump
- Oil Hose Reel: Hannay spring rewind hose reel with 50 ft of 1/2 in oil hose
- Dispense Valve: Graco high-volume dispense valve with electronic digital oil meter
- Filter: Donaldson spin-on filter assembly
Used Oil Recovery System
- Pump: Air-operated 1.50 in Graco diaphragm pump
- Valving: (4) way valve allows suction and discharge from on-board tank
- Suction Strainer: (1) Y-type suction strainer
- Filter Cabinet Drain: Used filter cabinet drain port plumbed into used oil system
- Used Oil Hose Reel: Hannay spring rewind hose reel with 30 ft of 1.00 in hose and ball valve
Anti-Freeze System
- Pump: Air-operated 1.00 in diaphragm pump
- Hose Reel: Hannay spring rewind hose reel with 50 ft of 1/2 in hose
- Dispense Valve: Graco 200 series dispense valve
Grease System
- System Type: High pressure grease system
- Pump: Air-operated 50:1 ratio Graco pump
- Hose Reel: Hannay spring rewind hose reel with 50 ft of 3/8 in hose
- Dispense Valve: Graco high pressure dispense valve
Fill System
- Ground Fill Connection: 0.75 in connection with ball valve located in reel cabinet
- Fill Hose: 0.75 in hose plumbed to tank
- Applies To: Basic ground fill product tanks except used oil, grease, and fuels
Electrical & Lighting
- Body Lighting: LED clearance and STT lights conforming to FMVSS 108
- Flood Lights: (6) 12 VDC LED flood lights
- Emergency Lights: (2) amber beacons at rear of unit
- Back-Up Alarm: 12 VDC back-up alarm
- Back-Up Camera: In-cab display back-up camera
Additional Equipment & Accessories
- Access Step: Side access ladder with grab assist bars
- Mud Flaps: Heavy-duty rubber
- Fire Extinguisher: 20 lb ABC extinguisher, shipped loose
- Tool Drawer: (4) drawer tool assembly installed in reel cabinet
- Safety Kit: ICC safety kit, shipped in cab
- Spill Kit: Elliott EMW5501 environmental spill kit
- Rear Bumper: Aluminum rear step bumper
- Spare Tire Carrier: Integral spare tire carrier above reel cabinet
Finish & Coatings
- Surface Prep: All surfaces mechanically cleaned and chemically washed
- Primer: PPG epoxy primer
- Finish Paint: (2) coats of PPG baked-on acrylic urethane
- Product Tanks: Aluminum tanks left unpainted
- Undercoating: Under body components are undercoated
- Color Note: Two-stage or custom colors available at extra charge
Applications
- Construction equipment service
- Mining fleet maintenance
- On-site preventative maintenance
- Mobile lubrication and fluid service operations
