Return To...

Utility Banner Pic

AeroLift

AeroLift

logoAERO-LIFT began production in 1969 in Caldwell, New Jersey, by the Bentey Family.They started with two basic models: two-tube telescopic unit with heights to 35 feet, and small vertical tower with heights to 18 feet. Over the years, AERO-LIFT developed a complete product line of aerial equipment with several models of telescopic units, vertical towers, cranes and special concept units for unique applications.

 

logoIn 2011, Structural Metal Fabricators began to manufacture the Aero-Lift product line (from 18 ‘ to 60’) in Palmerton, Pennsylvania. We manufacture vertical work platform and telescoping aerial crane work platforms for the utilities, rail road and light rail, municipal and contractor markets. These units are exceptional in the light rail business as well as tunnel washing. Please contact ABM Equipment & Supply for all new equipment purchases as well as for parts and repair.

AeroLift Models

  Model Description Options Specs
2TP
Working Heights: 38’ to 55’
Height to Bottom: 33’ to 50’
Platform Capacity: 1000 lbs.
Two Anchor Points
Standard Platform Size: 40” x 60”
Boom Elevation: -20º to +75º
Rotation: 360 Degrees Non-Continuous
Radio Control
Platform Leveling Hydraulic
Controls at Turret
Internal Cat Track
Platform Rotation: 180 degrees
Outrigger Inter-Locks
Full Pressure
Hydraulic Tool Circuit at Platform
110 Volt Outlet at Platform
Outriggers: H style, A style
Boom Rotation Continuous
Fiberglass Bucket 24” x 30”, 24” x 24”, 24” x 48”
Emergency Power
Start/Stop
Boom Winch
Power Pack
Boom Out of Rest
Bucket Rotator
2TPE
Working Heights: 40’
Height to Bottom: 35’
Platform Capacity: 500 lbs.
Standard Platform Size: 32” x 48”
Standard Non-InsulatedBoom Capacity: 1,000 lbs.
Boom Elevation: -20º to +75º
Continuous Rotation
Shear Ball-Bearing Turntable
Hydraulic Self-Leveling
Fully-Metering Controls
Platform Rotation 180º
Non-Insulated
Insulated to Category C
Hydraulic Tools at Platform
Engine Start/Stop
Emergency Pump
Boom-Mounted Winch
Various Outrigger Configurations
Platform Continuous Rotation 360º
110 Volt Outlet at Platform (Non-insulated Only)
3TP
Working Heights: 45’ to 65’
Height to Bottom: 40’ to 60’
Platform Capacity: 1,000 lbs.
Standard Platform: 40” x 60” Non-Insulated
Boom Elevation: -20º to +75º
Continuous Rotation
Shear Ball-Bearing Turn Table
Hydraulic Self-Leveling
Hydraulic Platform Rotation 180º
Fully-Metering Controls
Engine Start/Stop
Hydraulic Tools at Platform
Emergency Pump
Boom-Mounted Winch
Various Outrigger Configurations
Insulated to Category C
110 Volt Outlet at Platform (non-insulated only)
3-T Side-Mounted Fiberglass Bucket
10’ Elevator
3TPE
Working Heights: 45’ to 55’
Height to Bottom of Platform: 40’ & 50’
Platform Capacity: 750 lbs
Standard Platform Size: 32” x 48” Boom Capacity: 1,000 lbs.
Boom Elevation: - 20º to +75º
Continuous Rotation
Shear Ball Bearing Turn Table
Hydraulic Self-Leveling
Fully-Metering Controls
Platform Rotation 180º
Insulated to Category C
Hydraulic Tools at Platform
Engine Start/Stop
Emergency Pump
Boom-Mounted Winch
Various Outrigger Configurations
110 Volt Outlet at Platform (non-insulated only)
Platform Continuous Rotation 360º
10’ Elevator
HE
Hydraulic elevator to lift any one of the Aero-Lift by
SMF two or three boom telescopic aerial platforms up
to 55’ working heights.
This elevator gives an additional 10’ of vertical
working height.
Pedestal elevator is raised by a double-acting
cylinder. These cylinders have integral holding valves
to prevent free fall in the event of hose failure.
Stabilization – torsion bar as well as various
outrigger configurations are available, depending
upon capacity and size of unit.
 
2TW
Truck mounted tunnel washer unit.
TVH
Working Heights: 23’ to 40’
Platform Height: 18’ to 35’
Platform Size: 48” x 144”
Sliding Channel Members
Multi-Stage Double Acting
Telescopic Cylinder Non-Insulated
42” High Collapsible Railing
Platform Sear Ball Bearing
360º Rotation
Platform Side Reach 8’ to 10’
Insulated
Platforms Up To 18’
Start/Stop
Emergency Power
Hydraulic Tool Circuits at Platform
Various Outrigger Configurations
TVT
Working Heights: 18’ to 30’
Platform Capacity: 750 lbs.
Standard Platform Size: 48” x 86”
Standard Non-Insulated
Radio Control
Emergency Stop
Traversing Platform (64” each side)
42” High Hand Rails
Single Access Gate
Two Anchor Points
Mounting Kit
Insulated – TVT-I
Full-Pressure Hydraulic Controls
Electric Controls
Power Pack
Start/Stop
Jib & Winch
110 Volt Outlet (Steel Only)
Hydraulic Tool Outlets
H-Frame Outriggers
A-Frame Outriggers

 


Please fill out the form and someone from ABM will contact you.

 First Name *required
 Last Name *required
 Company
 Street Address
 City
 State
 Postal Code
 Country
 Phone *required Format: (111) 222-3333
 Email *required
Comments / Questions: